 |
| Quantity: | |
|---|---|
DYE
Application:
Back Taper extracting tank can be used in Chinese medicine, food and chemical industries to normal pressure, micro-pressure, water frying, warm soaking, heat cycling, cycling leaking, redolent oil extract and organically solvent recycle.
Advantage:
1. quick-open slag discharge door, safety and reliable, it’s easy to discharge slag.
2. high efficiency and simple operating, also has ClP cleaning system that is in accordance with GMP standards.
3. material adopts high quality stainless steel 304/316L.
Parameter:
| Model | TQ-Z-1.0 | TQ-Z-2.0 | TQ-Z-3.0 | TQ-Z-6.0 | TQ-Z-8.0 | TQ-Z-10 |
| Volume(L) | 1200 | 2300 | 3200 | 6300 | 8500 | 11000 |
| Design pressure in the tank(Mpa) | 0.09 | |||||
| Design pressure in the jacket(Mpa) | 0.3 | |||||
| Compressed air pressure（Mpa) | 0.6-0.7 | |||||
| Diameter of feeding inlet(mm) | 400 | 400 | 400 | 500 | 500 | 500 |
| Heating area(㎡) | 3 | 4.7 | 6 | 7.5 | 9.5 | 12 |
| Condensing area（㎡） | 4 | 4 | 12 | 5 | 8 | 20 |
| Cooling area(㎡） | 1 | 1 | 1.5 | 2 | 2 | 3 |
| Filtering area(㎡) | 3 | 3 | 3 | 5 | 5 | 6 |
| Diameter of residue discharging door(mm) | 800 | 800 | 1000 | 1000 | 1200 | 1200 |
| Energy consumption(kg/h) | 245 | 325 | 345 | 645 | 720 | 850 |
| Equipment weigh（kg) | 1800 | 2050 | 2400 | 3025 | 4030 | 6500 |
Application:
Back Taper extracting tank can be used in Chinese medicine, food and chemical industries to normal pressure, micro-pressure, water frying, warm soaking, heat cycling, cycling leaking, redolent oil extract and organically solvent recycle.
Advantage:
1. quick-open slag discharge door, safety and reliable, it’s easy to discharge slag.
2. high efficiency and simple operating, also has ClP cleaning system that is in accordance with GMP standards.
3. material adopts high quality stainless steel 304/316L.
Parameter:
| Model | TQ-Z-1.0 | TQ-Z-2.0 | TQ-Z-3.0 | TQ-Z-6.0 | TQ-Z-8.0 | TQ-Z-10 |
| Volume(L) | 1200 | 2300 | 3200 | 6300 | 8500 | 11000 |
| Design pressure in the tank(Mpa) | 0.09 | |||||
| Design pressure in the jacket(Mpa) | 0.3 | |||||
| Compressed air pressure（Mpa) | 0.6-0.7 | |||||
| Diameter of feeding inlet(mm) | 400 | 400 | 400 | 500 | 500 | 500 |
| Heating area(㎡) | 3 | 4.7 | 6 | 7.5 | 9.5 | 12 |
| Condensing area（㎡） | 4 | 4 | 12 | 5 | 8 | 20 |
| Cooling area(㎡） | 1 | 1 | 1.5 | 2 | 2 | 3 |
| Filtering area(㎡) | 3 | 3 | 3 | 5 | 5 | 6 |
| Diameter of residue discharging door(mm) | 800 | 800 | 1000 | 1000 | 1200 | 1200 |
| Energy consumption(kg/h) | 245 | 325 | 345 | 645 | 720 | 850 |
| Equipment weigh（kg) | 1800 | 2050 | 2400 | 3025 | 4030 | 6500 |
